ACRCFG

Use acrcfg to configure autoreconnect settings on a MetaFrame XP server or serverfarm.

Syntax

acrcfg [/server:servername | /farm] [/query | /q]

acrcfg [/server:servername | /farm] [/enable:on | off] [/logging:on | off]

acrcfg [/server:servername] [/inherit:on | off] [/enable:on | off]

[/logging:on | off ]

acrcfg [/?]

Parameters

servername

The name of a MetaFrame XP server.

Options

/query, /q

Query current settings.

/server

The server to be viewed or modified by the other command line options. Theserver specified byservernamemust be in the same server farm as the server onwhich the command is run. This option and the /farm option are mutually exclusive. The local server is the default if neither /server nor /farm is indicated.

/farm

The options on the command line after /farm are applied to the entire serverfarm.

/inherit:on |off

To use the autoreconnect setting from the server farm set /inherit to on for a

server. To disregard the server farm autoreconnect setting, set /inherit to off.

By default, this is set to on for a server.

/enable:on |off

To enable autoreconnect for a server or a server farm, set /enable to on.

Servers inherit the server farm setting unless /inherit is off. To disableautoreconnect for a server or server farm, set /enable to off .

/enable is set toon for both a server and a server farm by default.

Appendix A MetaFrame XP Commands 311

/logging:on |off

To enable logging of client reconnects for a server or server farm, set to on. To disable logging, set to off. Logging is set to off for both servers and server farms by default.

/?

Displays the syntax for the utility and information about the utility’s options.